Decking Designs – The Hidden Horrors of Composite Decking

Create an environmentally friendly deck by using composites. Composite decking is manufactured out of recycled plastic and wood shavings. By combining these two waste material into a unique building material composites are actually good for environmental surroundings. Composites reduce the amount of material entering our landfills meanwhile providing a low maintenance building product. Now you can actually feel very good about building your deck.

Constructing a deck with composite is not that much different than when using wood. Be sure to use right, dry wood for the sub-structure. Either treated or non-treated wood may be used. Composites need to have support every sixteen in . or less. In contrast, wood can span a twenty-four inch space. Be sure to check with your local building department for almost any building codes that must be met.

Once the sub-structure is built it is time to install the surface material. Unlike wood, composites are not afflicted with humidity. But composite decking will expand and written agreement greatly with temperature changes. When installing composite decking it is recommended that you use hidden fasteners. Hidden deck fasteners look better than screws and some of them are even able to stand up to the contraction and expansion that takes place with grp composite decking. Deck screws, even those especially designed for composite resin decking, can work their way up over time as the decking expands and contracts. And, with screws the decking can split at the ends even if it has been pre-drilled. These kinds of problems are avoided with hidden fasteners.

Hidden deck nails can be easy to install. Attach the concealed fasteners for the bottom of the deck boards. Place the decking in place and also attach the fasteners to the joists. There is no need to use grooved decking or any special tools. No biscuit-jointers or sledgehammers are required. The entire installation can be done from above the deck. And also, the hidden fasteners will expand and contract together with temperature changes.

By using invisible deck fasteners that are made for composite decking you can have a clean deck surface unmarred by screws or nails. Hidden deck fasteners which can be designed for composite decking do not cost that much more than screws. There are no special tools required and there is no pre-drilling. And, there is no penetration to either the sides or the covers of the decking. Composite deck fasteners allow you to have a beautiful veranda that is actually good for the environment.

Before you embark on your decking design adventure, there is always the question of which decking substance you want your deck designs to be. Decking design supplies are usually made out of wood or composites. We have all seen the gorgeous houses which contain wooden decks extending from its internal. However , we do know that these things rot, and are usually regarded as high maintenance or insect prone and always needs repairing every year. Not a good thing for your budget you say. Hence, you decide to pick Ecoscape UK Composite Cladding as part of your decking designs, yet wait – is this really the right option for you?

Just before we start, let me define what really is this expression ‘composite decking’. It really is a mixture of 2 materials, typically real wood pulp, and recycled material such as plastic bottles or plastic-type bags of polypropylene. Proponents of composites claim that it is a very environmentally friendly product as less trees are being cut down to make way for your beautiful new wooden deck. Nonetheless this notion is all wrong. Although composites are not since high maintenance as the typical wooden decking, cleaning those decks requires a lot of harmful chemicals and would in fact strip off the composite finish to get rid of mold. Not a extremely environmentally friendly way especially if it gets into your garden, is it? Occasionally, physical scrubbing may even be needed to remove that obstinate black mold sitting in the middle of your deck.

Furthermore, such materials are always subject to mechanical wear and tear and the usual removal in design. While conventional wood decks can be renovated every 5 years, your deck cannot be refurbished and has to be replaced. Plus, the limited lifetime warranty of most decking companies do not cover common damage such as mechanical split, mold growth and fading, and even if you have a legitimate declare, sometimes, labor and disposal is not covered as well. Ensure you check the warranty thoroughly before you decide to purchase composite decks to your home.

Sometimes, if the composites contain wood pulp, this will likely present another problem. Wood pulp used in these units are usually leftovers from the paper industry. Thus, the lumber present in your deck will start molding in the right problems and unlike conventional wooden decks, the mold is just not easily removed using the acidic cleaners which I have stated earlier. So much for all the claims of “low maintenance” by the organizations, right? Okay, so if wood is really not a good option, and then maybe vinyl composites are good. Virgin Vinyl is an example of a company dealing with composite decking designs. So far vinyl matinĂ© are still doing well, though, ultraviolet rays from the sun would certainly cause some damage to them as they break down the main aspect in vinyl composites — PVC.

Thus, with all these problems of composite decking designs it is no ponder why the best option for most of us is to stick to the conventional wood. In fact, wooden decks exudes that inherent beauty and formality of your home. For now, the technology of composite decking models is still in its infancy and the good quality ones are still out of the price range of most homeowners nowadays.