Hardwood Flooring Maintenance

Hardwood flooring require routine maintenance to prolong their lifetime. There are several ways one can go about it, however it’s ideal to be completely informed before cleaning hardwood. This way you can avoid the many mistakes and pitfalls people sometimes make that can really damage your flooring and decrease their lifetime.

In this article you will find out how identify the end of your floors, and using this information you are able to decide between several ways of cleaning, refinishing or waxing your flooring. Every cleaning technique is outlined with specific instructions which should be followed as closely as you can to be able to correctly keep your flooring.

To start, you must first define the finish of your flooring. If you put in the floors yourself, either you or your contractor will know just what complete they are. If you do not know, keep reading.

Most hardwood floors come in one of two finishes: prefinished and unfinished hardwood. To find out more about these two types of finishes, read the post on Prefinished vs. Unfinished Floors.

Prefinished Hardwood Floors are most commonly sealed at the surface to protect dirt and moisture from penetrating and causing damage. To clean these flooring, you cannot use any kind of oil or wax-based products or cleaners.

Prefinished flooring are water-resistant and so the best way to care for them would be to sweep and vacuum frequently, or utilize a water-and-soap solution to clean. A simple solution can be made using the following:

2. A Bucket full of water.

Simply mix them together in the skillet and then use a mop to clean the floor. WARNING: Do not use a totally wet mop, make sure that you cable the water-and-soap solution just enough so that the mop is damp, rather than wet.

A lot of men and women believe that instead of water-and-soap, a water-and-vinegar solution works. This may seem true, nevertheless using vinegar comes with the risk of causing damage to the floor finish due to vinegar’s acidic character. The best recommendation would be to use a water-and-soap alternative.

To clean scuff marks on prefinished laminate flooring toronto, rub a little baking soda on to a moist sponge and then buff away the scratches. To clean food stains and dirt, ALWAYS use a commercial cleaner.

Unfinished Hardwood Floors need more maintenance when cleaning and maintaining them. Unfinished floors are completed and seal-treated onsite during the setup. They’re also much more vulnerable to moisture damage and thus it is ideal to steer clear of water-based cleaning when coping with them.

Over time, unfinished hardwood will see a lot of wax buildup that may both be damaging to the ground and make it look very dull. Always make sure that you ask the hardwood’s maker to urge a commercial product which can do this.

The method for cleaning and waxing a bare flooring is clarified below.

2. Employing a manufacturer-recommended product, strip the wax buildup in the ground.
3. Make sure that the whole hardwood area is well-ventilated to stop dust and grime out of re-entering.
4. Apply a thin coat of wax to the wood, making sure to evenly distribute everything across the floor.
5. Once again maintaining the area well-ventilated, allow the ground dry.
6. Last, use the last coat of wax and let dry
7. Using either a cloth or buffing machine, buff the waxed hardwood floor.

For high-traffic areas, the floor ought to be waxed at least twice per year to prolong its life.

To look after little problems such as scuff marks, use a steel wool pad and then apply a very small amount of wax into the affected area. For food stains and dirt, always use a vacuum cleaner for unfinished hardwood.